Multidirectional focus measure for accurate three-dimensional shape recovery of microscopic objects

Shape from focus (SFF) is a technique to recover the shape of an object from multiple images taken at various focus settings. Most of conventional SFF techniques compute focus value of a pixel by applying one of focus measure operators on neighboring pixels on the same image frame. However, in the optics with limited depth of field, neighboring pixels of an image have different degree of focus for curved objects, thus the computed focus value does not reflect the accurate focus level of the pixel. Ideally, an accurate focus value of a pixel needs to be measured from the neighboring pixels lying on tangential plane of the pixel in image space. In this article, a tangential plane on each pixel location (i, j) in image sensor is searched by selecting one of five candidate planes based on the assumption that the maximum variance of focus values along the optical axis is achieved from the neighborhood lying on tangential plane of the pixel (i, j). Then, a focus measure operator is applied on neighboring pixels lying on the searched plane. The experimental results on both the synthetic and real microscopic objects show the proposed method produces more accurate three-dimensional shape in comparison to conventional SFF method that applies focus measures on original image planes.     

基于碳纳米管的超级电容器聚吡咯电极复合方法

For the defect that the mechanical properties of polypyrrole supercapacitors decrease with charge and discharge cycles, and the cycle stability is poor, a compound method of polypyrrole electrode for supercapacitors based on multi-walled carbon nanotubes is proposed. The structure of the formed polypyrrole coated multi-walled carbon nanotubes effectively increase the specific surface area of the electrode material, the utilization rate of the active material and the electrical conductivity, improve the rapid charge and discharge performance of the electrode material, and greatly improve cyclic stability of polypyrrole. The composite electrode materi- al of polypyrrole and functionalized multi-walled carbon nanotubes for supercapacitors is prepared by pulse current deposition meth- od. It is scanned at a scanning rate of 1000mV?s -1 in a 3mol?L -1 potassium chloride electrolyte, after 100,000-cycle, the capacity on- ly declines by 16%.     

综采工作面活性磁化水防尘技术研究

煤矿生产是环境较为封闭的井下作业，具有一定的特殊性，作业空间湿度高、生产环境复杂，其中粉尘是危害最大的因素之一，会对机器和人体造成不同程度的损害。粉尘的危害主要由两方面决定:煤尘能够燃烧，在浓度较高时还会爆炸；粉尘会危害人的身体健康。以平煤股份十矿-320 m水平己四采区东翼下段的己_15-16-24130工作面为研究对象，研究磁化水除尘的方法及原理，通过对比分析优选出活性磁化水添加剂，在该工作面试验后具有良好的除尘效果，大大增加了可见度、降低了空气中悬浮的煤尘。研究对该矿井其他工作面除尘工作具有指导意义。     

Functional organisation of the endomembrane network in the digestive gland of the Venus flytrap: revisiting an old story with a new microscopy toolbox

Up-to-date imaging approaches were used to address the spatiotemporal organisation of the endomembrane system in secretory cells of Dionaea muscipula. Different ‘slice and view’ methodologies were performed on resin-embedded samples to finally achieve a 3D reconstruction of the cell architecture, using ultrastructural tomography, array tomography, serial block face-scanning electron microscopy (SBF-SEM), correlation, and volume rendering at the light microscopy level. Observations of cryo-fixed samples by high-pressure freezing revealed changes of the endomembrane system that occur after trap activation and prey digestion. They provide evidence for an original strategy that adapts the secretory machinery to a specific and unique case of stimulated exocytosis in plant cells. A first secretion peak is part of a rapid response to deliver digestive fluids to the cell surface, which delivers the needed stock of digestive materials ‘on site’. The second peak of activity could then be associated with the reconstruction of the Golgi apparatus (GA), endoplasmic reticulum (ER) and vacuolar machinery, in order to prepare for a subsequent round of prey capture. Tubular continuum between ER and Golgi stacks observed on ZIO-impregnated tissues may correspond to an efficient transfer mechanism for lipids and/or proteins, especially for use in rapidly resetting the molecular GA machinery. The occurrence of one vacuolar continuum may permit continuous adjustment of cell homeostasy. The subcellular features of the secretory cells of Dionaea muscipula outline key innovations in the organisation of plant cell compartmentalisation that are used to cope with specific cell needs such as the full use of the GA as a protein factory, and the ability to create protein reservoirs in the periplasmic space. Shape-derived forces of the pleiomorphic vacuole may act as signals to accompany the sorting and entering flows of the cell.     

风速时间序列混沌判定方法比较研究

混沌识别是对非线性时间序列进行混沌预测的前提。针对时间序列风速确定性与随机性相结合的复杂非线性特征,研究了不同的混沌识别方法,并对风速时间序列进行混沌特征识别。应用随机噪声、周期运动及经典混沌系统的时间序列对所选方法进行可靠性验证。对美国国家风能研究中心M2测风塔实测时间序列风速数据进行非线性混沌特征识别。结果表明:风速时间序列具有明显的混沌特征;各风速时间序列表现出不同程度的混沌特征;各混沌识别方法对风速时间序列混沌特征的表达形式不同,互为补充,相互验证。     

公路治超必须从动态称重抓起

公路治超事业与动态称重事业是一对相互依存的共同体,治超离不开动态称重,动态称重也离不开治超事业。在"四个一流"公路治超体系建设的同时,与公路治超同呼吸共命运的动态称重技术也取得了很大发展,已经完成了由轴载荷计重模式向整车称重模式的转化,新技术已经具备高准确度、高稳定性、高通行率等特征,能够适应公路现场应用,计量结果完全不受车辆不规则驾驶的影响,精准可靠。公路治超事业需要准确的称重技术,动态称重技术需要公路治超的舞台,"四个一流"的公路治超信息化体系建设更离不开一流的动态称重技术。     

综采工作面设备快速回撤工艺探讨

神东煤炭集团柳塔煤矿12123综采工作面回采结束后,实际只用9天时间就完成设备快速回撤工作;本文以12123综采工作面设备回撤为实例,探讨了综采工作面设备回撤新工艺;该工艺可以在其他煤矿进行推广,有较强的应用前景。     

寒冷地区某既有办公建筑围护结构优化改造研究

既有公共建筑能耗中,围护结构节能潜力巨大。以兰州某既有办公建筑为例,采用DeST-C软件模拟围护结构不同材料厚度、窗型,得出系列负荷,通过对数据分析、比较,得出如下结论:外墙外保温适宜材料为50mm的挤塑板,最大热负荷节能率为45.66%;屋面适宜保温材料为65mm的挤塑板,最大热负荷节能率为4.25%;外窗各个朝向全部更换玻璃,推荐选用内张膜中空玻璃(双膜),最大热负荷节能率为7.36%;单独更换南向外窗材料,推荐选用真空镀膜复合中空玻璃,最大热负荷节能率为1.78%。     

河津腾晖煤业智能化降尘技术实践

以河津腾晖煤业为研究对象,基于智能化工作面开采及安全生产的需要,设计了智能化降尘系统,对该系统智能化控制关键技术进行了分析,提出了降尘点优化布置方案。该智能化降尘系统能较好地适应智能化开采技术的要求,实现了与综采智能控制系统的联动控制,降尘效果理想,为智能化开采提供了安全保障。     

电液控制系统关键传感器的故障预警方法研究

为了保证电液控制系统的正常运行,对电液控制系统核心传感器部件的故障预警是关键一环,分析了传感器在电液控制系统的工作原理,得到了传感器在系统中的故障规律,为了对井下的电液控制系统中的核心传感器的故障进行预警和诊断,结合目前比较流行的传感器故障预警方法,以液压支架的压力传感器为例,提出了一个静态分析与动态分析融合的诊断方法,其核心是通过对传感器采集的数据进行分析,能有效预测压力传感器故障,提高电液控制系统的可靠性。